Tecnomac ChillRapid E10, Инструкция по эксплуатации, Страница: 14 / 22

E
n
g
li
sh
10
blast chiller istrUction c-2003 06/2011
5.9 AUTOMATIC DEFROST CYCLES
(not available for MOD.
q
)
• the appliance automatically performs defrost cycles during
storage. three defrost cycles are performed during a 24-hour
period(once every 8 hours).
• the appliance automatically restarts once the defrost cycle
has been completed.
5.10 UV-C LAMP FUNCTION
• Use this function to sterilize the interior of the cell.
• when the appliance is ON
q
, press push-button
s
(relative
leD illuminates). the UV-c lamp switches on and sterilizes
the interior for a default time of 30 minutes. to interrupt the
sterilization cycle, press push-button
s
or open the cell
door. when the door is closed again, the lamp will remain off.
5.11 USER ENTRY TO PROGRAMMING DATA
• access for programming configuration parameters is only
permitted when the appliance is
ON
q
and there is no data
memory error active.
• Press and hold down push-buttons
u
and
i
at the same
time for more than five seconds; the computer will give ac-
cess to the programming function. Display
j
displays Pa,
while display
h
will show the relative value.
• Use push-button
t
to select parameter display (leD
t
a il-
luminated), or display 16 with settings (leD
t
illuminated).
• Use push-buttons
u
and
i
to scroll the list of parameters
(if leD
t
a is illuminated) or to modify the settings (if leD
t
b is illuminated).
• the computer automatically exits the programming function
after approximately 40’.
5.11.1 User parameter settings
Parameter Min. Max. Unit/meas. DEF
Pa PassworD -99 +99 number -19
/ = PROBE PARAMETERS
/1 cell probe calibration -10 +10 °c 0
/2 evaporate probe calibration -10 +10 °c 0
/3 core probe calibration -10 +10 °c 0
/8 temperature scale (0=fahrenheit 1=celsius) 0 1 flag 1
c = CHILLING / FREEZING
c0 cell probe differential 1 15 °c +3
c1 Duration of timed chilling and max. duration for chilling by temperature 0 400 min 90
c2 chilling end set point (core probe) -55 +99 °c 3
c3 Positive storage set point (cell probe) -55 +99 °c 2
c4
Duration of timed freezing and max. duration of freezing by temperature
(when c4=0, key and freezing function to -18°c are disabled.
for chilling units only.)
0 400 min 240
c5 freezing end set point (core probe) -55 +99 °c -18
c6 negative storage set point (cell probe) -55 +99 °c -25
c8 Positive and negative chilling duration countdown start temperature -55 +99 °c +65
ca core probe readout (readout only) --- --- °c ---
cb
set point for soft blast chilling (cell probe) and during second stage
of harD blast chilling
-55 +99 °c
-5
cd
ha rD chilling set point (temperature transition harD ->soft of core probe) -55 +99 °c 2 0
cf cell set point during first stage of harD blast chilling (core probe) -55 +99 °c -20
d = DEFROST
d0 Defrosting interval (0 = no defrost) 0 99 hours 8 h
da Defrost probe readout (readout only) --- --- °c ---
U = VARIOUS
u5 Duration of UV lamp activation (if u5=0, UV key is disabled) 0 99 min 0
ua Print interval (when ua=0, haccP key is disabled) 0 99 min 20