DISTANCE-Control
73
990267EN ind. A
Configuring work height when field sprayer is at rest
When the field sprayer is at rest, you set the work height as follows:
DISTANCE-Control is deactivated.
The field sprayer is on the field. The boom is located over the plants.
Field sprayer is not spreading.
1.
Set boom to desired work height.
2.
Switch to the "DISTANCE-Control" screen:
3.
- Save work height.
⇨
The work height will be saved.
Adjusting work height while working
Use the following function keys to operate the function:
Function icon
Function
Lift boom
Lower boom
You adjust the work height while working as follows:
DISTANCE-Control is active.
All USonic sensors are above the plants.
At least one section is spreading.
1.
Switch to the "DISTANCE-Control" screen:
2.
or
- Set boom to the desired height over the plants.
⇨
The boom moves each time the function buttons are pressed.
⇨
The work height will be saved as soon as you stop regulating the height.
⇨
DISTANCE-Control will stick to the saved distance while spreading.
Configuring clearance height
"Clearance height" - Distance between the boom and the plants when no section is spreading.
The set clearance height appears as the parameter "Sprayer off height".
Procedure
Controls
Procedure
8.3.3
