TECNOEKA KCV 96 P, Инструкция по использованию

Страница: 7 / 22

_ Electric Cookers _ rev. 2 ________________________________________________ KCV 96 P – KCV 96 – KCM 96_
_ CATEGORY II2H3+ _ GB __
0705
_______________________________________________________ page 7 _
Technical specifications Technical specifications Technical specifications Technical specifications
Model Model Model Model KCV 96 P KCV 96 P KCV 96 P KCV 96 P KCV 96 KCV 96 KCV 96 KCV 96 KCM 96 KCM 96 KCM 96 KCM 96
Overall dimensions LxDxH (mm) 900x600x850
Oven dimensions LxDxH (mm) 510x410x345 510x540x315
Usable oven volume (dm
3
) 72 66
Tray maximal load (GN 1/1) kg 4
Total load (4 trays GN 1/1) kg 16
Electrical capacity of grill heating
element (W)
2500
Electrical capacity of oven (W) 2700 5000 3200/5000
Maximum electrical capacity (W) 2900 5150 3350/5150
Power supply voltage (V~) 220-230 380-400 2N
Frequency (Hz) 50
Class I (against electric shocks)
Nominal thermal capacity (kW) 14,25
Appliance category
(for United Kingdom)
II2H3+
Gas connection
½
” ” ” ”
Installation class Class 2 - subclass 1 / Class 1
Factory adjustment
Supply nominal pressure values Liquid gas G30 / G31: 30/37 mbar - Natural gas G20: 20 mbar
The “technical data” page is located on the rear panel of the appliance. The “technical data” page is located on the rear panel of the appliance. The “technical data” page is located on the rear panel of the appliance. The “technical data” page is located on the rear panel of the appliance.
2.
2. 2.
2. Flush fitting in unit furniture
Flush fitting in unit furniture Flush fitting in unit furniture
Flush fitting in unit furniture
Make absolutely sure that the rear of the appliance always rests against non flammable walls.
Set the basement zone free.
If the cooking range is positioned on a pedestal, the appropriate measures must be taken to
ensure that it never slides off or tips over from the pedestal.
The appliance can be installed as follows (Fig. 1):
-
Stand-alone, away from other forniture (class 1);
-
Fitted between two forniture units (class 2 –
subclass 1).
In compliance with safety regulations, protection
against possible contact with electrical parts and
against overheating of furniture in contact wst the
appliance, must be ensured by correctly flush fitting
the appliance.
May we remind you that, for layers in plastic or
veneered wood in unit furniture, glues resisting a
temperature of 120°C must be used. Plastics or
glues of poorer quality not able to withstand this
temperature value, will cause deformation and glue
detachment.
Fig. 1
Fig. 1 Fig. 1
Fig. 1