Tecnoalarm TecnoFire TFNET, Руководство пользователя

Страница: 19 / 24

TFNET
19
Con fi guration repeaters
28/10/2016
28/10/2016
28/10/2016
28/10/2016
Menu Confi guration repeaters
Repeater 1
Repeater 2
Repeater 3
Repeater 4
Repeater 5
Repeater 6
Repeater 7
Repeater 8
Repeater 9
Repeater 10
Menu software options
Enabling 1
Enabling 2
Enabling 3
Enabling 4
Enabling 5
Enabling 6
Enabling 7
Enabling 8
Send
Reception
Menu software options: Enabling 5
00000000
00000000
00000000
00000000
00000000
00000000
00000000
00000000
Menu Confi guration repeater 1
Enabling
Description
Voice msg
Type
Software options Enabled
TFNET
00000000
Enabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Access level 3
Access level 3
Access level 3
Access level 3
08:18:59
08:18:59
08:18:59
08:18:59
Software licenses that allow to extend the capabilities of the device TFNET can be purchased at any time. At the time of purchase
a code is issued that must be entered in the con
fi guration menu of the repeater. When a valid code is recognized, the device
enables the related functions.
8 - SOFTWARE OPTIONS
00000000
5 MODBUS
3 TECNO OUT
TFNET - Software options
Option Description Name Item no.
3
TECNO OUT protocol management
TFABIL-TECNO TF2TFABILTECNO
5
MODBUS protocol management
TFABIL-MODBUS TFTFABILMODBUS
Note:
The option numbers not mentioned have not yet been assigned
Enabling of software options
Enabling of software options can only be performed from
the control panel setting menu "Repeaters".
Select and access the menu, select the address of
the repeater on which you want to assign the software
option.
Access the setting menu of the Repeater.
Select "Software options" and access the menu.
Select a row. e.g. select option 1 and access its entry form.
Enter the alphanumeric enabling code and exit the menu.
Send the enabling code to the device.
Select the item Send and con
fi rm with the OK key.
Receive from device the status of its software options.
Select the item Receive and con
fi rm with the OK key.
Check the mask of the software options of the device and
exit setup
00010000
5 MODBUS
3
Sosftware options
The enabling code consists of 8 numbers (either 0 or 1).
Number 0 indicates that the corresponding option is not active on the device, number 1 indicates that the corresponding option
is active on the device.
In the opposite example the only active option is number 5.
Select the software
options menu
Select the address
of the repeater
Access the repeater
Access the menu
Select the number of
the software option
Select Receive
and con fi rm
with the OK key
Select the character
Enter the character
Delete the last
character
At entry end
Select Send
and con fi rm
with the OK key
Access enabling code
entry form
Access the menu