28
DFDE001 – Rev. 0
PAR. 13
DANGEROUS SITUATIONS DURING THE FUNCTIONING
A)
Interruption of the power supply.
If power supply fails while the device is operating, DECERA goes off and get cold.
When the power supply is restored the equipment start working regularly, getting warm
again.
B)
Lack of water
.
The lack of water or the lowering of the water level under the position of the resistance
increases of the resistance’s temperature.
The thermostat gets engaged, cuts off the power supply to the resistance and signals the
danger situation by lighting the pilot light “DANGER” pos.2.
This safety situation is only temporary; no sooner the resistance’s temperature
decreases, falling under the value set on the thermostat, the resistance goes on
again.
This situation will keep repeating till the correct level of water in the tray has been
refilled.
If the above mentioned situation often happen, in time it could compromise the
equipment’s functioning and its working life.
The operator has continuously to control the device’s functioning.
PAR. 14
HARMFUL SUBSTANCES EMITTED BY THE EQUIPMENT
During operations steam and gas come out from the wax moulds contained in the cylinders.
As already described in the previous paragraphs, it is convenient to place and use DECERA
under a suction hood.
TECNO-GAZ WILL NOT TO BE HOLD RESPONSABLE FOR DAMAGES TO PERSONS OR
GOODS CAUSED BY NEGLIGENCE OR UNSKILFULNESS OF THE OPERATOR.