[VMTL006 – 2016.03]
It is necessary to disconnect the battery while it’s being charged, press the STOP pushbutton
for two seconds, in order to stop the charger manually.
The charger will suspend the charge and the LED “Charge complete” will turn on. At this time
it’s possible to disconnect the battery.
ERROR SIGNALS
If a faulty condition is detected, the charger will stop automatically and generate a fault
signal:
DEFECTIVE OR INCORRECT BATTERY: Both LEDs flashing
CHARGING FAILURE: Both LEDs remain in ON state
www.Tecnikcharger.com
-End of Manual-
