Tecnare Sound Systems V Series, Руководство по эксплуатации

Страница: 15 / 28

Operation Manual
www.tecnare.com V Series | rev. 2.00
14
2.4 Rotating the Horn
Access to the horn for configuration and checking is easily made by removing the front
grille.
1. Place the V Series loudspeaker with the wedge inclined toward you with the front grill
facing up. Ensure that the working surface is clean with a non-slip finish.
2. To remove the front grill of the loudspeaker, use a 4 mm hex key. Remove the six fixing
screws placed at both side loudspeaker enclosures.
3. Remove the two brackets carefully that holding the grille.
4. Release the four screws of the horn using a hex key. Pull the horn and the compression
driver upward out of the loudspeaker enclosure.
5. Check that the seal between the enclosure and horn is properly seated.
6. Rotate the horn carefully on the desired position and reinsert the horn and driver back
into the recess. Screw it onto the enclosure using medium-strength thread locker.
7. Screw the front grill back on.
Fig.2.- Change of configuration on V-12 and V-15
Fig.3.- Change of configuration on V-10