Tecnar accuraspray 4.0 Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 43

Tecnar accuraspray 4.0 Скачать руководство пользователя страница 6

This document contains information considered proprietary and confidential to Tecnar Automation Ltd

40101-00024-00– Rev E

Revision date: 2019-03-17

Page 6 of 43

User manual

Accuraspray4.0

1.2

G

ENERAL

P

RECAUTIONS

The following precautions should be observed at all times while operating
the Accuraspray 4.0. Tecnar Automation Ltd. assumes no liability
whatsoever for a user’s failure to comply with these precautions or the
warnings throughout this manual.

To protect your Accuraspray 4.0 from damage, you must:

•

Connect it to an unloaded, properly grounded power line (50–60 Hz. 100-

240VAC, 50-60Hz, 1.5 A).

•

We also recommend using an additional power line filter to filter out any

power surges or bursts;

•

Use it at an ambient temperature between 4 and 45 °C;

•

Supply 30 LPM (2CFM) of cooling/cleaning air at 1.7–2.7 bar (25–40 psi)

to the sensor head AT ALL TIMES while the unit is powered on.;

•

Use only original spare parts.

All Accuraspray 4.0 users should read this user manual, take the web-based
introduction and training session, and contact Tecnar with any further
questions. We also recommend that a copy of the user manual be kept near
the equipment at all times.

«
...
4
5
6
7
8
...
»

Содержание accuraspray 4.0












































Отзывы:

Нет отзывов