Tecnar accuraspray 4.0, Руководство пользователя

Страница: 11 / 43

This document contains information considered proprietary and confidential to Tecnar Automation Ltd
40101-00024-00– Rev E Revision date: 2019-03-17 Page 11 of 43
User manual Accuraspray4.0
Component Description
1. Air knife The air knife is used to keep the Accuraspray
windows clean and free of dust.
2. Optical system
viewport
Viewport of the temperature and velocity
measurement sensor.
3. Camera viewport Viewport of the camera used to characterize
the plume geometry.
4. Air supply port Compressed air is used both as active cooling
for the head’s internal components and, as it is
exhausted from the head, to generate an air
knife that keeps the viewport windows clean.
5. Alignment beam
switch
Activation switch for the alignment beam.
6. Substrate
pyrometer port
Used to power and communicate with the
optional substrate pyrometer sensor.
7. Communication
port
Used to power the sensor head and
communicate with the controller.
2.3 C
ABLES
,
HOSES AND ANTENNAS
The Accuraspray 4.0 is delivered with several cables, hoses and antennas,
which are described in the following table.
Cables/Hoses/Antennas Description
IEC power cable Used to connect the Accuraspray to a
power outlet.
Communication cable Communication between the controller
and the measurement head.
Antennas Used for WiFi communication.
Compressed air hoses Provide compressed air to the
measurement head for cooling and
purging purposes.
•
One hose connects the
compressed air supply to the air
filter;
•
One hose connects the air filter to
the pressure regulator;
•
One hose connects the regulator
to the measurement head;