Teclumen Spot 575 TM3, Руководство пользователя

Страница: 7 / 36

4- VOLTAGE AND FREQUENCY
The Spot 575 TMwith electronic ballast can operate at 90-245 VOLT 50 or 60 Hz.
The Spot 575 TMwith electromagnetic ballast can operate at
5- INSTALLATION
Spot 575 TMmay be either floor or ceiling mounted.
For floor mounting installations, the Spot 575 TMis supplied with four rubber mounting feet on the base.
For ceiling mounted installations, we reccomend the use of appropriate clamps to fix the unit to the
mounting surface.
The supporting structure from which the unit is hung should be capable of bearing the weight of the
unit, as should any clamps used to hung it. The structure should also be sufficiently rigid so as not to
move or shake whilst the Spot 575 TMis moving.
Four quarter turn fast locks placed on the base of the units,allows by using the two fast lock C clamps
provided in the box, to fix the unit in any position.
.
5.1- Safety cable
We recommend the use of a safety cable or chain connected to the Spot 575 TMand to the suspension
truss in order to avoid the fixture accidentally falling should the main fixing point fail. Make sure that the
iron cable or chain can bear the weight of the entire unit.
You may attach the safety chain to the two holes (A) located on the base of the fixture, as shown in the
picture below.
5.2- Protection against liquids
The projector contains electric and electronic components which should under no circumstances come
into contact with oil, water or any other liquid. The proper unit functioning would be compromised
should this occur.
230 V 50-60 Hz(Standard)
On request: 100 V 50-60 Hz /120 V 60 HZ / 208 V 60 Hz
7
A
Spot 575 TM3