Fusion colour 7 FC
Cod. 7107693905 – Cod. 7107143905 (IP65) v 1.1 IT/EN
Description of the main menu
To scroll the items of this menu use ‘UP’ and ‘DOWN’ keys.
Visualizzation
Option
Description
Press ‘ENTER’ to display the current DMX address. Use ‘UP and ‘DOWN’
keys to change value and press ‘ENTER’ to confirm or ‘ESC’ to cancel.
Addr
DMX addressing
Press ‘ENTER’, the display will show the current DMX mode. Using ‘UP and
‘DOWN’ keys, change the DMX mode and then press ‘ENTER’ to confirm.
To see all possible settings, see the ‘DMX description’.
Mode
Setting of DMX mode
Press ‘ENTER’ to set the projector in stand alone mode. Press ‘UP’ and
‘DOWN’ to select the fixed colour (c) or the program (p) to play. N.B.
There is no DMX output. Press ‘ESC’ to stop this function.
StdA
Stand alone functioning
Press ‘ENTER’ to set the projector in stand alone mode. Press ‘UP’ and
‘DOWN’ to select the fixed colour (c) or the program (p) to play. N.B.
There is DMX output to control other projectors on dmx line. Press ‘ESC’ to
stop this function.
Dmxo
Automatic functioning with DMX out
Press ‘ENTER’ to display the current state of ‘Hi-p’ function. If it is ‘off’, the
supply of LEDS is 350 mA, if it is ‘on’ supply of LEDS is 410 mA
Hi-p
Boost of LED power
Press ‘ENTER’ to display the current dimming mode. Change the value
using the ‘UP or ‘DOWN’ keys then press ‘ENTER’ to confirm. If the value
is ‘off’, the dimming will be quick and nervous. If the value is ‘on’, the
dimming will be smooth.
Smoo
Dimming mode
On this model there is no effect.
Fan
Fan settings
Press ‘ENTER’ to display the current projector temperature. Press ‘ESC’ to
exit.
Temp
Projector temperature
Press ‘ENTER’ to display the maximum projector temperature from the last
time it was turned on. Press ‘ESC’ to exit.
Maxt
Maximum projector temperature
Press ‘ ENTER’ to display the current unit of measurement for the
temperature. The values can be ‘cels’ (Celsius) or ‘fahr’ (Fahrenheit). Press
‘UP’ or ‘DOWN’ to change the value and press ‘ENTER’ to confirm or ‘ESC’
to exit.
Unit
Unit of measurement
Press ‘ENTER’, set the maximum level for Red using ‘UP’ and ‘DOWN’ .
Press ‘ENTER’ to confirm and ‘ESC’ to exit.
Calr
Red calibration
Press ‘ENTER’, set the maximum level for Green using ‘UP’ and ‘DOWN’ .
Press ‘ENTER’ to confirm and ‘ESC’ to exit.
Calg
Green calibration
Press ‘ENTER’, set the maximum level for Blue using ‘UP’ and ‘DOWN’ .
Press ‘ENTER’ to confirm and ‘ESC’ to exit.
Calb
Blue calibration
Press ‘ENTER’, select ‘reset’ using ‘UP and ‘DOWN’ to reset to default all
values. Press ‘ENTER’ to confirm and ‘ESC’ to exit.
Def
Set all the values to default
Press ‘ENTER’ to display the firmware version of the projector. Press ‘ESC’
to exit.
Vers
Software version
Press ‘ENTER’ to display the serial number of the projector. Press ‘ESC’ to
exit.
Sern
Serial number
PASS
EN
Pagina
9
