Tecknet TK-MS001, Руководство пользователя

Страница: 4 / 14

① ② ③
④ ⑤
⑥
The mouse has a built-in 550mAh polymer rechargeable lithium
battery, which requires no replacement. It takes about 2.5 hours
to reach a full charge from zero power. In the case of using for 2
hours a day, and the rest of the time is in standby/sleep mode, it
can be used for about 90 days after a full charge. When the
mouse runs out of power, the indicator light on the top keeps
flashing. Charge the mouse through the charging port inside
the mouse.
Follow the charging steps below:
1. Open the cover of the mouse, take out the USB-A receiver and
you can see the USB-C charging port.
2. Plug a charger with a USB-A port into a power source (charger
not supplied).
3. Connect the mouse to the charger or a laptop with a USB-A
port with the supplied USB-A to USB-C charging cable. When
connected to power, the status indicator on the top of the
mouse lights red, indicating that the mouse is charging, and
the red light is off when charging is complete.
This mouse supports 2.4 GHz connection. Verify that your
computer has an available USB-A port for inserting the USB-A
receiver that comes with the mouse. If your computer does not
have a USB-A port, you can use a hub for connection. If you
don’t have a hub and your computer has Bluetooth function,
you may connect via Bluetooth connection. Here are the steps
for 2.4GHz connection:
1. Open the cover of the mouse, take out the USB-A receiver,
and close the cover.
2. Plug the USB-A receiver into the USB-A port of your
computer.
3. Slide the 3-mode switch at the bottom of the mouse to the
right. The mouse is now turned on to the 2.4GHz connection
mode.
4. After the mouse is connected, the green indicator on the top
of the mouse goes out, and you can use the mouse now.
Note:
This mouse is produced with 2.4GHz mode and has been paired
with the USB-A receiver, so you don’t need to re-pair it. (If
disconnection occurs due to unconventional operations, press
and hold the left button, scroll wheel, and right button at the
same time for about 3 seconds. At this time, the green light
flashes quickly indicating the mouse entering the pairing mode.
Plug the receiver into the USB-A port of your computer to
complete pairing.)
Connect the mouse to your device:
2.4GHz connection
4. After charging is complete, put away the charging cable for
further use, and close the mouse cover.
Tip:
If the mouse will not be used for a long time, slide the 3-mode
switch to the middle to turn off the mouse for saving power
and increasing battery life.
EN-4 EN-5