Intelligent Power Saving (IPS)
The mouse is equipped with Intelligent Power Saving (IPS) function.
• When the USB Nano receiver is disconnected or the PC is switched off,
the mouse will automatically switch off to conserve power.
• If the mouse is not used for 5 seconds, it will automatically drop to the
first level of IPS. To wake the mouse, click any button.
• If the mouse is not operated for 8 minutes, it will automatically drop to the
second level of IPS -- sleep mode. To wake the mouse, click any button.
DPI Switch
The mouse supports
800/1200/1600/2400/3200/4800DPI. To switch to
either setting, press the DPI button. The default
setting is 1200 DPI. Click the DPI button on the top
of the mouse once to switch from 1200 DPI to
1600 DPI, the DPILED will flash three times. Press
the DPI button for each time, the DPI will rise to
next level, and the DPI LED light will flash for one
more time.
Low Power Indicator
The mouse is equipped with low power indicator.
When the battery power gets low during the
period of use, the LED indicator will flash to
remind you replace the battery.
Note: We recommend you use AA alkaline dry
cell battery.
Reconnection
DPI Switch
Low Power Indicator
There is a wireless signal connection code for this mouse. High
temperatures, electro-magnetic fields or vibration may influence the code
signal and occasionally the mouse may need to be reconnected. Both
the mouse and Nano receiver have a built-in code and one mouse can
be connected to one receiver, or several mice to one Nano receiver.
1.Unplug the Nano receiver from USB port, and plug it back in.
2.Move the mouse within 50cm of the Nano receiver, re-install the battery or
press any key to reconnect; the above process must be completed within
15 seconds. LED indicator would flash if reconnection is successfully.
3.The mouse will be ready for use after reconnection.
11
