Planning, Installation, Maintenance and Operating Instructions
dw
62-2 ME Sliding Doors
- 17 -
Runner rail casing (optional)
Type “A”
•
Fix the runner rail casing to the rail sleeve
ype “
B“
runner rail casing to the ceiling
min. 95mm]
1.2 Advanced Limit Stop
of the hydraulic brake mechanism,
s
r by
aution!
Correct functioning and installation according to the instructions has to be determined by an acceptance
he acceptance test should only be carried out by specialists of or authorised by the release or hold open
according to 2.8 (runner rail casing-
ceiling mounting.
T
•
Fix the
[FAZ 12/10 plug (12); e
≤
500,
Ø 12mm drill bit, drilling depth
1
Assembly and commissioning
limit stops and magnetic clamp occur as described in
2.7. (The sleeve distance for fixing the tension pulley ha
to be at least 600mm from the edge of the door)
The limit stop (7) is fixed (as displayed) to the doo
the customer at the last panel – as viewed from the
closing side - (4.8x16mm bolts or welded).
12
“B”
“A”
Dimension
FT = Leaf Division
"Y“
≤
34m²
300
>34m² 500
*1) Symmetrical division is standard, i.e. FT (L) and FT (R) = door clearance / 2
C
test and documented in an “Inspection Book for Hold Open Devices” after the installation of sliding doors with hold
open devices. The manufacturers of release devices and hold open devices should draw attention to this test. The
operator has to make sure that the necessary steps are taken.
T
device manufacturer or specialists of a specified inspection authority.
