• Always disconnect from power supply if it is left unattended and
before assembling, disassembling or during cleaning.
• Switch off the appliance and disconnect from supply before
changing accessories approaching parts that move in use.
• Potential injuries can occur with misuse. Care shall be taken
when handling the sharp cutting blades, emptying the bowl and
during cleaning, as they are extremely sharp.
• Regarding the instructions for cleaning surfaces in contact with
food or oil, thanks to refer to the below paragraph
"
CLEANING AND MAINTENANCE
" in manual.
• Regarding the instructions for the use of accessories, operation
times and speed settings, refer to the below paragraphs.
• Potential injuries can occur with misuse. Care shall be taken
when handling the sharp cutting blades, emptying the bowl and
during cleaning, as they are extremely sharp.
•
the device shall not be not used continuously more than 10
minutes and shall rest at least for 20 minutes.
BEFORE THE FIRST USE
• Remove the appliance and all accessories gently, paying attention to sharp
accessories.
• Clean all accessories and bowls with soapy water and wipe them thoroughly.
• Clean the exterior of the appliance with a damp sponge or cloth and wipe it.
Unwind the power cord completely.
• Check that the voltage in the country where you are, corresponds to the voltage
indicated on the device.
• Plug the unit into a good electrical outlet, (earthed if the device is class I), to avoid
danger.
• Disconnect the power cable from the power supply before performing any
maintenance cleaning and accessory fitting.
• Always place the appliance on a table or horizontal flat surface.
• Never modify the device.
• The device should not be left unattended when connected to the main power
supply.
7
