4. Insert the cone in the cone holder by checking the position of the axis.
5. Screw the Cone clamping screw (to the left), to secure the cone.
Note : the cone should not be free on its axis if properly installed.
6. After use, to remove the cone and the cone holder perform the reverse
operation.
USE OF “RAPTOUT” MACHINE
1. Place the unit on a flat level, slip if possible.
2. Connect the equipment into an outlet properly installed.
3. Place a bowl under the opening of the cone holder to recover the shredded food.
Note : Press the “On” switch briefly once or twice before placing food in the feed
tube. This will ensure that the cone is properly attached to the drive shaft of the
motor.
4. Hold down the "On" pusher and introduce the food to be grated or sliced into the
tube.
Note: When releasing the button, the unit will stop automatically.
5. Use the pusher (if necessary) to push food inside the tube.
At the end of the use,
1. Release the Start / Stop button to stop the unit.
2. Remove the electric plug from the outlet.
3. Remove the cone as described above.
4. Clean the device and accessories after each use, as described below.
Tip: Wash removable parts immediately under the tap, because once dry, fruit pulp
or leftover vegetable can be removed with more difficulty.
ACCESSORY TO MAKE ICE DESSERTS
1. Spout and system lid
2. Grinding auger
10
