TECHWOOD THV-1400i, Инструкция по эксплуатации

Страница: 9 / 18

• Check that the tension in force in the country where you are, corresponds to that
indicated on the apparatus.
• Connect the apparatus in a correct socket-outlet, (and connected to the ground if
the unit is Class I), to avoid any danger.
• Disconnect the power source cable before any operation of cleaning of
maintenance and accessories assembly.
• Never modify the appliance in anyway.
• The device should not be left unattended when connected to the main power
supply.
ASSEMBLY
1. Hold the chopper tube by the head and insert it into the machine (fig.1).
2. Turn the head to the left (fig.2) until you hear the click of attachment.
Note :Try to tilt the head of tube grinder slightly to the left and right (without forcing)
to make sure the tube is in place.
4. Place the feed screw in the tube, (long end first), turning it slightly until it is
correctly placed in the motor housing (fig.3).
5. Place the cutting blade on the feed screw shaft with the blade facing forward.
(Fig.4).
NOTES: If the cutting blade is installed upside down, the meat will not be ground.
Choose the metal plate with holes, depending on the desired hash:
Fine, Medium, Large.
Place the desired plate in front of the cutting blade, adjusting the lugs in
the slots (fig.5).
6. Hold or press the centre of the cutting plate with your finger and remove it
quickly when tighten the fixing ring until it is tight. (Fig.6). Do not over tighten.
7. Place the hopper plate on the head in the correct position.
8. Place the unit on a firm, flat, horizontal surface.
9