9
This steam iron is also designed for vertical ironing. It is therefore possible to iron
with steam, hanging curtains and clothes (jackets, suits, coats) by holding the iron
upright and pressing the steam activator.
Filling the water tank
1. Open the water tank cap at the front of the steam generator.
2. Fill the tank with fresh water up to 2/3 of the tank capacity.
3. Close the water tank cap securely.
Notes: If the tap water in your area is very hard, we advise you to mix the tap
water with an equal amount of demineralized water.
Do not put perfume, vinegar, starch, descaling agents and other
chemicals in the water tank.
Never use hot water.
Starting & Temperature adjustment
1. Insert the plug into a grounded wall outlet
2. Check the garment label for the required ironing temperature :
●
Synthetic fabrics (for example acrylic, polyamide) and fragile natural fabrics
like viscose, silk ...
●●
Wool
●●●
Cotton
●●●
+ Linen = MAX temperature.
3. Press the On / Off switch to activate the device.
The indicator light comes on.
4. Set the ironing temperature to the appropriate temperature indication. The
steam generator and the iron start to heat up.
Notes: By pressing, the first time, on the key of "super steam" a little water may
leak from the sole due to initial thermal instability.
Direct the first jet of steam on a cloth and not on the cloth to board.
5. As soon as the indicator light goes out, the steam unit is ready for ironing.
6. To activate the "super" steam, press the steam trigger or set the switch to
Steam Continuous.
The steam emission can be deactivated at any time by releasing the steam trigger
or (if it was used) by setting the steam switch to 0.
Remarks
- Caution: The steam supply hose can become very hot during a long ironing
session.
- The system can sometimes produce pumping sound during steam ironing. This
is normal and indicates that water is being pumped into the tank.
- Steam ironing is only possible at ironing temperatures higher than
●●
.
- During steam ironing, the ready-to-use steam indicator will light on and off at
intervals to signal that it is regulating the temperature.
- Opening and closing of the steam valve in the steam tank causes a clicking
noise. It's perfectly normal.
