TECHWOOD Beauty for Men TCO-2530, Инструкция по эксплуатации

Страница: 18 / 22

NOSE TRIMMER
● Only the blade unit and INNER/ONUTER blades should be cleaned.
● Keep motor and battery dry.
● Dry the blades before replacing.
Special safety instructions
*Do not insert the device further than the thin tip of the shearing blade up your
nose!
*Do not use the device if the shearing blade holder, the shearing blade or the
inner blade are distorted or damaged! DANGER OF INJURY!
*This device is to be used exclusively for the cutting of nose and ear hair! Do not
use the device any other purpose!
*The shearing blade and the inner blade are precision-manufactured. Do not
exert heavy loads on it and avoid knocking!
*Keep the device away from humidity and liquids!
*Do not remove the shearing head during use! Switch off the device and remove
the battery before cleaning!
*Do not insert pointed objects in the shearing head.
Insert Battery
*Open the battery compartment by pushing the cover down and away.
*Insert an LR6 or AA type 1.5V battery with the positive pole (+) upwards in the
battery holder.
*Place the cover back on the battery compartment.
Putting into Service
1. Take the protection cap off the shearing head.
2. To switch on the device shift the on/off switch towards the shearing head.
3. Insert the tip of the shearing head in your nose. Warning: Remove only the hair
coming out of your nose and do not press the device inwards! Do not insert the
shearing head too deep and forcefully into your nose: risk of injury!
4. If pieces of hair remain in your nose after cutting, remove these simply by
clearing your nose.
5. Switch the device off after use with the on/off switch and open the battery
compartment.
6. Take the cleaning brush out of the holder on the battery compartment cover.
Brush the shearing head in a star-shaped manner.
7. After cleaning insert the cleaning brush back into the holder and close the battery
cover.
18