TECHWOOD Beauty for Men TCO-2530, Инструкция по эксплуатации

Страница: 15 / 22

RECHARGEABLE SHAVER
TO KNOW HIS UNIT
1. Protective cover of the cutting blades
2. Micro stainless steel grid
3. Cutting heads (A - B - C)
4. Eject button of the shaver head
5. Body
6. On / Off switch
7. Charging indicator light
Shaver
1. Take off the shelter and press the switch.
2. Softly touch your skin and move in the contrary growth
direction of beards slowly.
- If you stretch your skin tightly, you can obtain better
effect.
3. Once the shaving is over, push the switch down at once and cover it with the
shelter.
NOTE : ​ Charging time can’t exceed 15 hours or it affects the life of battery, even
damages the line.
Trimmer
1. Open the back cover and pull off the trimmer.
2. Softly touch your skin in the right-angle direction with the
trimmer and trim slowly.
3. After using, push down the switch and cover it with the
shelter.
4. Press the switch and take off the shelter. Press the
outer-cutter button and take off the outer cutter. Clean the
beards on the outer cutter, the inner cutter and the body (1 time a week).
5. After cleaning, assemble the outer cutter and the inner cutter on the original
position and cover it with the shelter.
● Don’t press the net shelter.
● Don’t prizes open the net shelter with a screw with a screw driver.
● Do not change the positions of A B C heads and the directions of net cover
so as to avoid the affection to the normal operation of razor.
Maintenance
1. Remove the protective cover of the grid
2. Press the button (located under the head) to separate the shaver head and
15