View Snapshot:
Select this option to view the photos you have taken by the snapshot
button.
Remove Device:
Select this option to remove the surveillance system from your phone.
Smartphone Push Notifications:
If the iHomeView smartphone app is running in the background of your phone; you
will receive a push notification to show that someone has triggered the alarm by
motion detection. Please make sure motion detection is enabled on the surveillance
system if you want to receive these notifications.
Exit the iHomeView app on your smartphone to stop receiving push notifications.
Troubleshooting:
If…
Try…
The camera's signal status icon
shows no bars
·Make sure the camera is connected to power.
·Make sure that the camera's antenna is attached and
the monitor's antenna is extended.
·Make sure the camera is paired to the correct channel.
·Re-pair the camera and monitor.
The camera won't pair with the
monitor
·Make sure the camera is connected to power.
·Press and release the pairing button quickly. Do not
press and hold the pairing button.
Safety Instructions:
Do not open the monitor or camera for any reason.
Do not expose the camera outdoors, it is a weatherproof camera however it is
recommended to be placed undercover otherwise it may damage the camera.
Avoid pointing the camera in direct sunlight.
