Maintenance
©
BA/ECB/GB/0505
13
For this, fill the cleaning chemical at the recommended
concentration in the ultrasonic bath and operate for several
minutes. Then empty the unit and wipe the tank walls clean.
For reasons of hygiene, we recommend to disinfect the
transducer tank and the edge of the tank regularly. (Household
disinfectants)
6.2 Repair
In case of any damage please contact your supplier or the
manufacturer of the unit.
Repair works require special know how and must be carried out
by specialized personnel only.
Use original spare parts only.
The mark of CE conformity may lose its validity due to
unauthorized opening of the unit.
The manufacturer cannot be held responsible for any damage
caused by unauthorized opening of the unit.
Opening by
authorized
specialized
personnel only
CAUTION
6.3 Troubleshooting
Before returning the unit to the supplier or manufacturer for
repair, please check the following possible causes:
Malfunction
Possible cause
Remedy
no function;
LED dark
x
mains plug not connected
x
mains cable damaged /
interrupted
x
plug in the mains plug
x
return unit to manufacturer /
supplier
no function;
LED is on, no flashing of
LED
x
on/off key has not been
pressed correctly
x
faulty electronics
x
press on/off key again
x
return unit to manufacturer /
supplier
no function;
LED flashes green
x
faulty electronics
x
return unit to manufacturer /
supplier
cleaning result not
satisfactory
x
no cleaning chemical or
unsuitable cleaning chemical
has been used
x
cleaning interval too short
x
use suitable cleaning
chemical
x
repeat cleaning interval
housing or mains cable
damaged
x
possibly by third party
x
return unit to manufacturer /
supplier
