SL-216-36G-P150
Fax
:021-66402031
Www.techs.is , [email protected]
Page
15
Chapter 3: Hardware connection
3.1 RJ45 port connection
Connect the RJ45 port of the switch and the corresponding network device via cables, the POE
power supply function of the switch is default enabled on the downlink port of the switch,
which can be used for IEEE802.3af or IEEE802.3at standards powered devices such as APs,
bridges, and network cameras
Note
：
When the switch connected workstations, servers, routers or other ethernet devices the
cable length should be within 100 meters;
The Auto-MDI / MDIX ethernet interface is enabled by default. Category 5, the standard
network cable or crossover cable can be used for Ethernet connection.
Do not connect the RJ45 port to the phone line
\
