WG3100-Series GSM VoIP Gateway User Manual
_______________________________________________________________________________
Techroutes Network Pvt. Ltd.
22
Port
Number of GSM/CDMA ports.
Type
Indicates the current type of network. Such as CDMA or GSM
IMSI
International Mobile Subscriber Identity, it is the uniquely identifies of
SIM card
Status
Indicates the connection status of current GSM / CDMA module
Remaining Call
Duration
It showing available total call minutes of SIM card while call limitation is
enabled.
Carrier
Displays the network carrier of current SIM card.
Signal Quality
Displays the signal strength of in each channels of GSM / CDMA.
BER
Its indicate error rates between mainboard and userboard, Modular and
Base station
ASR
Answer Seizure Ratio is a measure of network quality. It’s calculated by
taking the number of successfully answered calls and dividing by the
total number of calls attempted. Since busy signals and other rejections
by the called number count as call failures, the ASR value can vary
depending on user behavior.
ACD
The Average Call Duration (ACD) is calculated by taking the sum of
billable seconds (bill sec) of answered calls and dividing it by the number
of these answered calls.
PDD
Post Dial Delay (PDD) is experienced by the originating customer as the
time from the sending of the final dialed digit to the point at which they
hear ring tone or other in-band information. Where the originating
network is required to play an announcement before completing the call
then this definition of PDD excludes the duration of such
announcements.
Call Status
Show the Status of port, include idle, active, alert and processing
Idle
means there is no call on this channel
Processing
means call is connecting
Alerting
means destination is ringing
Active
means the call is connected
