Techpro HYBDVR-FEO8, Руководство пользователя

Страница: 108 / 270

117
Figure 4-78
4.10.2.8 Email
The email interface is shown as below. See Figure 4-79.

SMTP server: Please input your email SMTP server IP here.

Port: Please input corresponding port value here.

User name: Please input the user name to login the sender email box.

Password: Please input the corresponding password here.

Sender: Please input sender email box here.

Title: Please input email subject here. System support English character and Arabic
number. Max 32-digit.

Receiver: Please input receiver email address here. System max supports 3 email
boxes. System automatically filters same addresses if you input one receiver
repeatedly.

SSL enable: System supports SSL encryption box.

Interval: The send interval ranges from 0 to 3600 seconds. 0 means there is no
interval.

Health email enable: Please check the box here to enable this function. This function
allows the system to send out the test email to check the connection is OK or not.

Interval: Please check the above box to enable this function and then set the
corresponding interval. System can send out the email regularly as you set here.
Click the Test button, you can see the corresponding dialogue box to see the email
connection is OK or not.
Please note system will not send out the email immediately when the alarm occurs. When
the alarm, motion detection or the abnormity event activates the email, system sends out
the email according to the interval you specified here. This function is very useful when
there are too many emails activated by the abnormity events, which may result in heavy
load for the email server.