4
35) MICROPHONE INPUT 1
36) ALARM/SLEEP
37) MIC VOLUME
38) MIC ECHO
39) TELESCOPIC ANTENNA
40) BATTERY COMPARTMENT
41) EXTERNAL POWER ADAPTOR JACK
42) SWITCH FOR RECHARGEABLE
BUILT-IN BATTERY
CAUTION:
-
USAGE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
-
THIS UNIT SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT QUALIFIED SERVICE
PERSONNEL.
-
IF YOU FIND ANY MALFUNCTION OR FREZZING OF THE UNIT DURING OPERATION, PLEASE TRY TO
UNPLUG THE UNIT AND WAIT FOR 10 SECONDS. THEN PLUG THE UNIT AND RESTART AGAIN
WARNING:
-
THE APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND THAT NO OBJECTS
FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.
-
BATTERIES (BATTERY PACK OR BATTERIES INSTALLED) SHALL NOT BE EXPOSED TO EXCESSIVE HEAT
SUCH AS SUNSHINE, FIRE OR THE LIKE.
PRECAUTIONS FOR USE
INSTALLATION
UNPACK ALL PARTS AND REMOVE PROTECTIVE MATERIAL.
CONNECT
THE
EXTERNAL POWER ADAPTOR
WITH
EXTERNAL POWER ADAPTOR JACK.
DO NOT CONNECT THE UNIT TO THE MAINS BEFORE CHECKING THE MAINS VOLTAGE AND BEFORE
ALL OTHER CONNECTIONS HAVE BEEN MADE.
DO NOT COVER ANY VENTS AND MAKE SURE THAT THERE IS A SPACE OF SEVERAL CENTIMETERS
AROUND THE UNIT FOR VENTILATION.
PUSH
THE
STANDBY KNOB
TO SWITCH ON THE UNIT,
STANDBY INDICATOR
WILL BE OFF.
SETTING THE CLOCK
1 WHEN
THE
STANDBY INDICATOR (RED COLOR)
LIGHT UP, UNIT IS IN THE STANDBY MODE.
2
DURING STANDBY MODE, SELECT BETWEEN 12H OR 24H MODE: PRESS AND HOLD
MODE BUTTON
FOR 3-5 SECONDS, 12H / 24H WILL BE FLASHING. PRESSING
SKIP UP
BUTTON OR SKIP DOWN
BUTTON
TO SELECT 12H / 24H MODE. PRESS
MODE BUTTON
AGAIN TO CONFIRM.
3
SETTING HOUR: PRESSING
SKIP UP
BUTTON OR SKIP DOWN
BUTTON
TO SELECT THE
CORRECT HOUR, THEN PRESS
MODE BUTTON
AGAIN TO CONFIRM.
4 SETTING MINUTE: AFTER STEP 3 IS COMPLETED, PRESSING
SKIP UP
BUTTON OR SKIP
DOWN
BUTTON
TO SELECT THE CORRECT MINUTE, THEN PRESS
MODE BUTTON
AGAIN TO
CONFIRM.
SETTING ALARM
1. DURING STANDBY MODE, HOLD
ALARM BUTTON
FOR 3-5 SECONDS. SETTING ALARM SEQUENCE IS
“ALARM ON TIME > ALARM OFF TIME > ALARM MODE > ALARM VOLUME”.
2. SETTING ALARM ON TIME: “ON” IS LIGHTING ON THE DISPLAY
i.
SETTING HOUR: PRESSING
SKIP UP
BUTTON OR SKIP DOWN
BUTTON
TO
SELECT THE CORRECT HOUR, THEN PRESS
ALARM BUTTON
AGAIN TO CONFIRM.
ii.
SETTING MINUTE: T PRESSING
SKIP UP
BUTTON OR SKIP DOWN
BUTTON
TO SELECT THE CORRECT MINUTE, THEN PRESS
ALARM BUTTON
AGAIN TO CONFIRM.
3. SETTING ALARM OFF TIME: “OFF” IS LIGHTING ON THE DISPLAY:
i.
SETTING HOUR: PRESSING
SKIP UP
BUTTON OR SKIP DOWN
BUTTON
TO
SELECT THE CORRECT HOUR, THEN PRESS
ALARM BUTTON
AGAIN TO CONFIRM.
ii.
SETTING MINUTE: PRESSING
SKIP UP
BUTTON OR SKIP DOWN
BUTTON
TO
SELECT THE CORRECT MINUTE, THEN PRESS
ALARM BUTTON
AGAIN TO CONFIRM.
4. SETTING ALARM MODE: “TUNE” IS LIGHTING UP ON THE DISPLAY:
i. PRESSING
SKIP UP
BUTTON OR SKIP DOWN
BUTTON
TO SELECT THE
