10
2. PRESS
REC
BUTTON, THEN “ONE” WLL BE FLASHING ON THE DISPLAY. PRESS
SKIP UP
BUTTON
OR SKIP DOWN
BUTTON
TO SELECT “ALL” ON THE DISPLAY. PRESS
REC
BUTTON AGAIN TO
CONFIRM.
3. USB ICON WILL BE FLASHING ON THE DISPLAY. COPYING IS PERFORMING NOW.
4. WHEN THE USB ICON STOPS FLASHING, IT MEANS THAT ALL TRACK COPYING IS COMPLETED.
SPLIT TRACK FUNCTION FOR USB/SD RECORDING FOR CASSETTTE/AUX IN
1) MANUAL SPLIT OPERATION PROCEDURE:
DURING USB RECORDING, THE USB ICON WILL FLASH ON
THE DISPLAY. IF A NEW TRACK IS REQUIRED, PRESS
MODE
BUTTON ON THE UNIT OR REMOTE CONTROL,
DISPLAY WILL SHOW “TS”, THEN THE UNIT WILL STOP RECORDING MOMENTARILY AND RESUME AGAIN. A
NEW FILE WILL HAVE BEEN CREATED ON THE USB DEVICE REPRESNTING A NEW TRACK.
2) AUTO SPLIT OPERATION PROCEDURE:
- BEFORE USB RECORDING, SELECT AUDIO SOURCE, THEN PRESS
MODE
BUTTON ON THE UNIT OR
REMOTE CONTROL, DISPLAY WILL SHOW “T-ON”, WHICH MEANS THE AUTO SPLIT FUNCTION HAS
ACTIVATED. THEN START USB RECORDING, THE UNIT CAN AUTOMATICALLY DETECT THE SILENT PART
BETWEEN EACH TRACK, AND CREATE A NEW FILE TO MOVE ON TO START RECORDING THE NEXT TRACK.
-
IF NOT REQUIRED: PRESS
MODE
BUTTON ON THE UNIT OR REMOTE CONTROL BEFORE USB
RECORDING, DISPLAY WILL SHOW “T-OF”, WHICH MEANS AUTO SPLIT HAS BEEN DEACTIVATED.
-
PLEASE NOTE FOR AUTO SPLIT: SEVERAL SECONDS OF THE BEGINNING OF THE NEXT TRACK MAY
NOT BE RECORDED, AS THE UNIT MAY TAKE A FEW SECONDS TO CREATE A NEW FILE ON THE USB; AND IT
CAN ADDITIONALLY BE THE CASE THAT SOME MUSIC PRODUCERS INTENTIONALLY ADD SILENT SECTIONS
WITHIN ONE TRACK. AS A RESULT, THIS WILL VERY LIKELY MAKE THE UNIT CONSIDERS THIS SILENT PART
THE BREAK BETWEEN TRACKS AND CREATE A NEW TRACK ON THE RECORDING.
-
NOTE FOR AUTO SPLIT: DURING USB RECORDING FROM CASSETTE PLAYER, WHEN THE UNIT HAS
DETECTED ANY PARTICULAR SILENT PART, THE CASSETTE PLAYER WILL STOP MOMENTARILY. THE
CASSETTE PLAYER WILL RESUME OPERATION ONCE THE USB/SD DEVICE HAS BEGUN CREATING A NEW
FILE TO BE RECORDED.
BLUETOOTOOTH CONNECTION
-
PRESS
SOURCE BUTTON
REPEATEDLY TO SELECT BT MODE (BLUETOOTH), THEN THE
UNIT IS READY FOR CONNECTION WITH YOUR BLUETOOH DEVICE (SUCH AS MOBILE
PHONE).
-
SWITCH ON THE BLUETOOTH FUNCTION OF YOUR BLUETOOH DEVICE, AND SELECT
“MONSTER S” BLUETOOTH EQUIPMENT FOR CONNECTION.
-
AFTER YOUR BLUETOOH DEVICE IS CONNECTED WITH THE UNIT VIA BLUETOOTH, START
TO PLAYBACK YOUR DEVICE.
MICROPHONE INPUT
-
MICROPHONE INPUT X 2 ARE AVAIBALE FOR MICROPHONE JACK
-
ECHO KNOB
AND
MICROPHONE VOLUME
ARE USED TO CONTROL MICROHONE ECHO LEVEL AND
VOLUME SEPARATELY.
BASS AND TREBLE CONTROL
-
BASS KNOB
AND
TREBLE KNOB
TO CONTROL THE BASS AND TREBLE LEVEL FOR MUSIC
PLAYBACK
-
EARPHONE JACK
THIS SYSTEM CAN BE CONNECTED WITH HEADPHONE OR EXTERNAL AMPLIFIER / SPEAKER BY 3.5MM
EARPHONE JACK.
