-
4
-
4
.
Landing
Gear
Glue together the contron horns
and their backplates.
Aileron carbon fiber push rods
with
Z
bend
.
Assemble the landing gears and fix them with some
foam-friendly C/A.
Install the landing gear stiffeners.
Install the landing gear stiffeners.
Install the landing gears with some
foam-friendly C/A.
Fix the wheel covers with some
foam-friendly C/A.
5
.
Control Horns and Servos
Glue the anti-differential arm to the servo if you want to extend the
length of the servo arm.
Fix the aileron control horns with
some C/A.
Cut a 40mm long carbon fiber strip and a 20mm slot on the bottom vertical fuselage as shown.
Insert the strip into the slot, then apply some C/A to fix it. The strip is used as a tail skid.
