¯
3
4
5
Menu Mode (factory default)
Menu mode: DV-68 will loop file 000 as the “menu”
and will then play “file (button press)”. For example,
button 3 will play file 003 on the card. At the end of
playing the file, the menu file (000) will begin
looping again. Button access requires a TV-66K.
Repeat Mode
Repeat mode: DV-68 will play all the files in
sequence, one file at a time in numeric order. After
the last file has played, the DV-68 will start with the
first file (001) again. On a button press, the DV-68
will play “file (button press)”. For example, button 4
will play file 004 on the card.
Changing Playback Modes
DIP Switch Selections (
DEFAULT
)
Down
Up
1.
Menu Mode
| Repeat Mode
2.
Composite Output
| VGA Output
3.
OSD OFF
| OSD ON
4.
JPG top load
*1
| JPG Full screen
5.
PIR Track 1
| PIR Track 2
6. Letterbox 16:9 video file |
16:9 Full Screen
7. Auto TV type
|
NTSC (TV Type)
8. Is the opposite setting of DIP# 7
*1
DV68
MUST
be running when changing DIP#4.
Using JPEG and MP3 files
JPEG files will be shown for a 3-second duration both
in MENU mode and REPEAT mode (unless it is the
“menu”). When a MP3 file is selected, a frequency bar
chart will show up when playing.
Connecting to your display
Plug in the RCA end of A/V cable to the jacks located
at the read of the DV-68 and then plug in the
corresponding Yellow (Video), White (Audio L) and
Red (Audio R) into the inputs on your monitor. Turn
on power to the display and change the channel to the
corresponding A/V input channel if necessary
Operating Guide
The full operating guide (and FAQ page), as well as
sample files for the DV-68, are available for
downloading from the Technovision website:
www.technovision.com/manuals.html
www.technovision.com/ftp
Options
TV-66K, Keypad & button controller
The required interface for connecting and controlling the
DV-68 player with an external input device, such as push
buttons or motion sensors.
DV68 remote (part# 1530-0020)
This service remote allows you to manually change SETUP
parameters such as the amount of time .jpgs will stay on the
screen etc..
DV66MS, PIR Motion Sensor Module
Extremely compact (25mm x 35mm) with 3 leads for easy
connection (default cable length is 20”).
DV66RS232, RS232 Interface Cable
Allows users to easily control the DV-68 series devices
via RS232 from a computer.
CF1G (1GB) to CF4G-FAT (4Gig) High Speed
Compact Flash Cards are available from
Technovision.
