Setting Up
35
8.2
Installation
WARNING
Risk of injuries for persons due to heavy objects!
The components mentioned above are very heavy and bulky.
Always have several persons carry out the installation or dismantling or use
appropriate lifting devices!
NOTICE
Impairment of air circulation!
Impairment of air circulation leads to reduced refrigeration capacity of air-cooled
versions.
•
Provide sufficient space for unhindered air circulation.
•
Do not place objects in front of or on top of the unit.
NOTE
The unit is equipped with castors (swivel-type and lockable).
NOTE
The castors are not suitable for transporting the unit. They are solely intended for
moving the unit in the area of the installation location.
Take the following measures prior to the set-up:
•
Prepare the set-up location (level ground with a sufficient load-bearing
capacity).
•
Perform the set-up in accordance with the specifications in the project
drawings (e.g. floor plan, foundation plan) (if provided).
Set the unit up at the intended installation site.
Set up the unit in a horizontal position.
NOTE
•
Use the unit only inside buildings.
•
Do not set up the unit in areas in which other systems/units cause high
ambient temperatures.
•
The air inlet and outlet must be free. It must be ensured that air that is
blown out cannot be sucked in again.
•
Ensure sufficient air circulation.
•
Protect the unit against dust and moisture.
Comply with the maximum lengths (hoses, pipes, cables etc.) and pressure and
temperature values as stated in the "Technical Data" section.
The connections to the device must be flexible and sufficiently pressure- and
temperature-proof.
