Safety
19
4.5
Operation
•
Operation is permissible only if all of the components are in a perfect
technical state and proper operational condition and if they are used in line
with the intended purpose.
•
Avoid any operation that compromises the safety of the unit/system.
•
The operator must ensure that unauthorised persons cannot work on the
machine.
•
Prior to switching the unit/system on, the operator must ensure that no
persons are put at risk by starting the machine.
•
During operation, the entire hazard area must be observed or closed off so
that no one can enter this area without being noticed.
•
Do not leave the unit/system unattended during operation.
•
Use the unit/system only if all of the guards and safety devices are present
and fully functional.
•
The operator must ensure a clean and clearly arranged workplace at and
around the unit/system by issuing corresponding instructions and performing
checks.
•
Observe the controls and indicators during operation.
4.6
Maintenance
The operator must ensure that the unit/system and its safety devices and guards
are kept in a functional state. The control devices as well as the safety devices and
guards must be checked in terms of their effectiveness.
Only specialised and trained personnel are authorised to perform maintenance,
repairs and overhauls.
If safety devices or guards need to be removed for maintenance, overhauls and
repairs, they must be reinstalled and checked for correct operation immediately
after the completion of the tasks.
4.7
Operating faults
Malfunctions of the unit/system may be caused by a fault that can be localised and
eliminated with the aid of the "Troubleshooting" section.
•
Assign the associated tasks to the corresponding specialised personnel.
•
If the fault cannot be eliminated, contact the service of the manufacturer.
NOTE
See the "Contacts" section.
