Technoton MasterCAN DAC15, Руководство по эксплуатации

Страница: 56 / 63

Annex A SPN of MasterCAN DAC Functional modules / Vehicle power supply FM
MasterCAN DAC J1939 i/o modules. Operation manual. Version 2.0
© Technoton, 2018 56
Table A.5 — Vehicle power supply FM.
SPNs, displayed and/or editable in Service S6 MasterCAN software
SPN Name
Factory
value
Unit of
measure
Range Clarification
Vehicle power supply status
PGN 63089
521055 Vehicle Power
Supply Voltage
On the fact V 0…3212.75 Shows current value of ON voltage.
521055 /2.9 Vehicle Power
Supply
Voltage/
2.9 Average
For 5 Minutes
On the fact V 0…3212.75 Shows average value of ON voltage within previous
5 minutes.
521056 Vehicle Power
Supply Status On the fact No Off/
Lowe level/
Accumulator/
Starter/
Generator/
High level
Shows current mode of ON in accordance with user-defined
borders of ON voltage levels of Vehicle
(see figures A.6 and A.7).
521076 Vehicle Power
Supply
Presence
On the fact No On/Off Displays the current state of the board (On/Off) in
accordance with the user-set voltage level of the system trip
(see figures A.6 and A.7).
Power supply borders
PGN 63067
521075 Nominal
Battery
Voltage
24 V 0…60 Field for entering a nominal value of accumulator voltage of
Vehicle (U
nom
=12V/24V) (see figures A.6 and A.7).
521063 High Voltage
Level
1.29 - 0…1.99 Field for entering value of high voltage level of onboard
network (1.29▪U
nom
) (see figures A.6 and A.7).
Entered value of voltage is used as a threshold for recording
"Faulty ON"
Event .
521064 Generator
Voltage
Level
1.16 - 0…1.99 Field for entering value of voltage level of generator, i.e.
when engine of Vehicle is running (1.16▪U
nom
)
(see figures A.6 and A.7).
521065 Engine
Starter
Voltage
Level
0.91 - 0…1.99 Field for entering value of voltage level starter is running, i.i
when Vehicle’s engine is starting (0.91▪U
nom
)
(see figures A.6 and A.7).
521067 Low Voltage
Level
0.75 - 0…1.99 Field for entering value of low voltage level of ON
(0.75▪U
nom
). Entered value of voltage is used as a threshold
for recording "Faulty ON" Event (see figures A.6 and A.7).
521068 Battery Off
Level
0.20 - 0…1.99 Field for entering value of voltage level when ON switches
off (0.20▪U
nom
) (see figures A.6 and A.7).
521074 Engine
Starter
Continues
Working
Time Limit
30 s 5…30 Field for entering value of starter’s permissible time of
continuous operation, above which the starter may fail
(see figures A.6 and A.7).
Entered value is used as a threshold for recording
"Exceeding permissible time of continuous operation of
starter" Event.
Vehicle power supply. Counts
PGN 62976
521173 Vehicle
hours of
operation
on power
supply
On the fact s 0…4211080000 Counter of total operating time of Vehicle from onboard
network since sensor installation to the Vehicle. User
cannot reset the value of this counter
* .
521172 Vehicle
hours of
operation
from battery
On the fact s 0…4211080000 Counter of total operating time of Vehicle from
accumulator since sensor installation to the Vehicle. User
cannot reset the value of this counter
* .
521170 Starter
hours of
operation
On the fact s 0…4211080000 Counter of total operating time of starter since sensor
installation to the Vehicle . User cannot reset the value of
this counter * .
521171 Starter
hours of
operation
On the fact s 0…4211080000 Counter of total operating time of Vehicle’s engine since
sensor installation to the Vehicle. User cannot reset the
value of this counter
* .
* Counter can be reset by the Manufacturer of RSC .