Technoton MasterCAN DAC15, Руководство по эксплуатации

Страница: 19 / 63

General information and technical specifications / Technical specifications / Analogue signals specifications
MasterCAN DAC J1939 i/o modules. Operation manual. Version 2.0
© Technoton, 2018 19
1.5.3 Analog signals specifications
1) Analog signals of MasterCAN DAC15
Table 2 — Specifications of signals for MasterCAN DAC15 analog inputs
Signal type, measurement units Value
Voltage, V 0.5…9
Frequency, kHz 0.01…10
Note — The input impedance of the analog input is at least 150 kOhm.
Table 3 — Specifications of signals for MasterCAN DAC15 analog outputs
Signal type, measurement units Value
Voltage, V 0.5…9
Frequency, kHz 0.01…10
Pulse,
Amplitude, V;
Duration, ms. 0.5...9
40...250
Current, mA 4 … 20
Discrete, V
(upper branch (supplied U
*
PS
))
level 0 — 0
level 1 — U *
PS
Discrete, V
(inverse, lower branch (supplied GND),
see
annex B )
level 0 — 10
(without connecting the load)
level 1 — 0
Resistive, kOhm 0.015 … 50
* U
PS
– onboard circuit voltage.
Notes
1 The load current of the analog output should not exceed 40 mA.
2 The maximum current of the descrete outputs should not exceed 0.3 A.
3 The maximum load impedance for the current output is calculated according to the
formula: R
L max
=( U *
PS
- 5 V)/0.02 Ohms.