4
Edition: 12/17
Manual
VP / VPS / VPS H / VPS DSM / VPS RF
Warning! this device has to be grounded
This device may only be operated using alternating current and the operating voltage indicated
on the power rating plate
•
Nominal Voltage 230V AC, 50 Hz
•
Protection Class I
•
Degree of Protection IP 24
•
Room Thermostat 7°C till 30°C
2.1 User Manual for the VPS / VPS H / VP
The console is segmented into the following parts
:
(+ )
key
( )
key
Mode
selector key
On\ Off switch
2.1 Selectror key:
The Selector Key has 4 basic Functions:
“Comfort,” “Setback”, “Frost Protection”, and “Off”
Comfort Mode:
The heater is in continuous operation. To change the set temperature press the + or
- key
Setback Mode:
Here you can make adjustments for night -time operating
Frost Protection:
The heater is working in Frost Protection Array (7°C)
OFF:
The two parallel lines in the display indicate that the heater is still running.
2.2 Normal Operation:
To turn the heating device on, press the On\Off key and select between the Comfort and Setback mode.
You can switch between the different modes by pressing the selector key until the desired token appears
on the display. In addition the digital visual display will show the amount of electricity used and the room
temperature. By pressing the + or – key, you can adjust the different settings. The display will flash
approximately 4 times in two intervals. If the current room temperature is different to the desired room
temperature you can make adjustments by pressing the + or – key. Almost instantly you will feel the warm
air coming out of the heater .The + or- keys allow you to set the heater to your desired defaults at any time.
GB
