background image

VarioSelectCDE 18-27 TECHNOTHERM

4

2.  Safety instructions

Please read these instructions carefully before installing or using the appliance! Keep the instructions handy with the applian-

ce for future use!
Instruction manuals are intended for the specialist who is respon-sible for the installation of the appliance. Operation 

manuals are for the end user. The latest version of the instructions can be found online at
 http://www.technotherm.com/Instantaneous-Water-Heater-varioselect.html

• 

Do not use the appliance until it has been correctly installed and unless it is in perfect working order.

• 

Do not remove the front cover under any circum-stances before switching off the mains electrical sup-

ply to the unit.

• 

Never make technical modifications, either to the appliance itself or the electrical leads and water 

pipes.

• 

The appliance must be earthed at all times.

• 

Pay attention to the fact that water temperatures in excess of approx. 43 °C are perceived as hot, 

especially by children, and may cause a feeling of burning. Please note that the fittings and taps may 

be very hot when the appliance has been in use for some time.

• 

The appliance is only suitable for domestic use and similar applications inside closed rooms, and must 

only be used to heat incoming water from the mains supply.

• 

The appliance must never be exposed to frost.

• 

The values stated on the rating plate must be observed.

• 

In case of malfunction, disconnect the fuses imme-diately. In case of leaks, cut off the mains water 

supply instantly. Repairs must only be carried out by the customer service department or an authori-

sed professional.

• 

This appliance can be used by children aged from 8 years and above and persons with reduced physi-

cal, sensory or mental capabilities or lack of experience and knowledge if they have been given super-

vision or ins truction concerning use of the appliance in

 

a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning 

and user maintenance shall not be made by children without supervision.

Содержание CDE 18-27 VarioSelect





















Отзывы: