Technosoft IBL2403 Series, Техническое описание

Страница: 69 / 90

©
Technosoft 2007 59 IBL2403 Technical Reference
Remark:
If you don’t use the advanced features presented below you don’t need EasyMotion
Studio. In this case the IBL2403 is treated like a standard CANopen drive, whose setup is done
using EasySetUp.
5.3.1. Using TML Functions to Split Motion between Master and Drives
With Technosoft intelligent drives you can really distribute the intelligence between a CANopen
master and the drives in complex multi-axis applications. Instead of trying to command each step
of an axis movement, you can program the drives using TML to execute complex tasks and
inform the master when these are done. Thus for each axis, the master task may be reduced at:
calling TML functions (with possibility to abort their execution) stored in the drives EEPROM and
waiting for a message, which confirms the finalization of the TML functions execution.
5.3.2. Executing TML programs
The distributed control concept can go on step further. You may prepare and download into a
drive a complete TML program including functions, homing procedures
22
, etc. The TML program
execution can be started by simply writing a value in a dedicated object,
5.3.3. Loading Automatically Cam Tables Defined in EasyMotion Studio
The IBL2403 offers others motion modes like
23
: electronic gearing, electronic camming, external
modes with analogue or digital reference etc. When electronic camming is used, the cam tables
can be loaded in the following ways:
a) The master downloads the cam points into the drive active RAM memory after each
power on;
b) The cam points are stored in the drive EEPROM and the master commands their copy
into the active RAM memory
c) The cam points are stored in the drive EEPROM and during the drive initialization
(transition to Ready to Switch ON status) are automatically copied from EEPROM to the
active RAM
For the last 2 options the cam table(s) are defined in EasyMotion Studio and are included in the
information stored in the EEPROM together with the setup data and the TML programs/functions.
Remark:
The cam tables are included in the
.sw
file generated with EasyMotion Studio.
Therefore, the drives can check the cam presence in the drive EEPROM using the same
procedure as for testing of the setup data.
5.3.4. Customizing the Homing Procedures (for IBL2403 CAN executions)
The IBL2403 supports all homing modes defined in DSP-402 device profile. If needed, any of
these homing modes can be customized. In order to do this you need to select the Homing
22
The customization of the interrupt service routines and homing routines is available only for IBL2403 CAN executions
23
Optional for the IBL2403 CANopen execution