Technoprint Techno-HA-06, Руководство пользователя

Страница: 3 / 11

Prevention of an electric shake;
The casing may never be opened or removed, take care that there are never be liquids or other
materials in the door latching or ventilation grate. Switch off the reflow-oven immediately, pull the
plug out of the wall socket and ask the supplier what to do. Don’t put the plug and the line cord not
in water or other liquids
Don’t leave the line cord over the edge of a table, don’t leave the line cord on a warm foundation
and don’t leave the line cord at the backside of the reflow-oven. If the line cord is damaged replace it
with a special line cord it must be done by capable electric-trained personal .
Warning:
It’s illegal for children to work with this reflow-oven , this reflow-oven is also not produced for
persons ( also children ) with less physical, sense organs and mental capacity or with less experience
and knowledge.
Don’t make any change at the reflow-oven , don’t move the reflow-oven when it is in production, the
reflow-oven is only for soldering of PCB’s.
Not the supplier or manufacturer is responsible for damage at the reflow-oven or personal injury
when the oven is not installed properly or is not connected at the right procedure.
The reflow-oven can be hot when the reflow-oven reach the soldering temperature so be careful
with touching at that moment.