Technoplus multiflex 80280, Руководство по эксплуатации

Страница: 26 / 48

SETTINGS ON THE MACHINE
26 Version 1.0
10. Settings on the machine
10.1. Setting the vertical bore depth
The actual bore depth is not adjusted, rather, the thickness of the workpiece to be
processed. The display is adjusted in such a way as that 57mm long drill bits provide
a bore depth of 13 mm.
1. Release star knob "1"
2. Turn thumbscrew "2" until the counter "3" shows the thickness of the material to
be processed.
3. Clamp star knob "1"
10.2. Setting the vertical bore spacing
1. Release clamping lever "1"
2. Turn hand wheel "2" until the counter "3" shows the desired position. When
adjusting the bore spacing, one should always adjust from a greater value to a
smaller value, in order to allow play for play compensation in the threaded spindle.
3. Clamp clamping lever "1"