Technomate TM-Twin-OE, Руководство пользователя

Страница: 18 / 55

18
5.2. Step-2 Time
You should select the time zone where you are in and summer time correctly.
You don’t need to adjust the time and date manually because the time and date will be synchronized
with one in the broadcasting signal when you watch any program after finishing these installation phase
successfully (in case of Sync with TDT is Any TP or “reference” TP).
● Receiver should have exact time for correct
operation.
● Otherwise, the program time provided by the
EPG and user’s reservations of programs may be
distrustful.
● Receiver can take time from broadcasting signal
or set by user.
● You should specify your time zone and summer
time correctly.
■ Time Zone : Select your area (ex : Berlin,
Germany and you can see the current date DD/MM/YY and current time of the selected area) Press the
Yellow key to show the time offset table (example : GMT+1:00, Berlin using / key)
■ Summer Time (Yes, No) : If set “Yes”, you can also select the start /end period.
- Start : Start date of daylight saving time
■ Format (DD/MM/YYYY, YYYY/MM/DD) : Display format
■ Sync with TDT (Any TP, Below CH, No) : if select “Below CH” , time zone will be set automatically
with broadcaster information
- TDT (Time Date Table) : Receive the time from broadcaster
5.3. Step-3 Audio, Video
Select your TV aspect ratio and the best resolution, etc.
● Video Resolution (576i 50Hz ,720p 50Hz,1080i
50Hz,1080p 24/25/30 Hz) : Selects the video
resolution with framing rate. Please select the
possible highest resolution to fit your TV.
● Video Format (YCbCr/CVBS, RGB/CVBS,
YCbCr/YC, RGB/RGB) : Selects the video signal
type for your TV. If you have a legacy TV which has
only SCART connector, Select 576i mode resolution,
then you can also select one of RGB, YC, and
CVBS signal type. RGB is clear than YC and CVBS
but your TV may not handle it.
● Aspect Ratio (4:3, 16:9): Specifies the screen aspect ratio of your TV correctly. It will affect the