1.2 After completed the setting, press [SET] to confirm, and [DEL]
exit to the main menu.
Note : Default setting is level 5.
8) IP Setting
LCD will display “1-AU 2-3-IP” and flashing.
Note : No function on this model.
H. SPEAKER VOLUME CONTROL (4 LEVELS)
Switch on the hands free speaker, press [VOL] to adjust the speaker volume.
Note : Default setting is Level 4, the highest level
I. LAST NUMBER REDIAL
1.
Lift the hand set or switch on the hands free speaker, press [REDIAL].
2.
The last dialed number will redial automatically.
J. MUSIC ON HOLD
1.
During the conversation, you can press [HOLD] key to hold up the line.
The other end will hear the music.
2.
Press the [HOLD] key again to return the conversation.
K. FLASH
1.
Press the (FLASH) button, the phone line will break and disconnected.
2.
You can use this function to utilize the special services. (please consult
your switching system provider for details)
L. CALLER ID DISPLAY
1.
If you subscribe to caller ID services from your local telephone company,
this telephone will show the call information on the display screen, and
the current date and time will also be updated.
2.
When the incoming call received, the “NEW” icon will be displayed.
3.
Press [UP] / [DOWN] key to view the incoming call number, or press
[DEL] to erase the number.
4.
If the incoming call is a repeat calling, display will show as “REP”.
5.
Any error or corrupted information received, the display will show “---E-
--”
6.
If the caller has exercised the option to prevent his name and number
from being sent, “---P---” will be shown on the screen.
7.
“---O---” will display, when some one calls from an area where the
telephone company is not offering the caller identification services or an
area that is not yet providing name and number delivery to your area via
the long distance network.
8.
When caller ID memory is full, it will automatically delete the oldest
calls in order to make a room for the new ID number.
Note : The caller ID will only detect information between the first and
second rings. You should wait for the second ring before picking up the
phone or pressing the hands free button.
M. CALCULATOR
1.
Calculator function can be used in on-hook or off-hook state. Press
[CAL] enter into the calculator mode.
2.
Operate the calculator function by UP, DOWN, VOL, HOLD, *, # and
the numeric keys.
3.
Or press [CAL] key again to exit.
MAINTENANCE
1.
Do not position in areas of high humidity, dust, high
temperature, mechanical shock or strong sunlight.
2.
Do not position in bathrooms or near water.
3.
Do not disassemble the telephone, it contains no user-
serviceable parts.
4.
Do not place this product on an unstable cart, stand or table.
The product may fall and causing serious damage to itself.
5.
It is recommended to disconnect the telephone line from the
wall socket during the thunderstorms, as lightning might
seriously damage the telephone. The warranty does not cover
damage caused by lightning.
6.
Do not attempt to recharge the batteries that are used with this
product.
7.
All batteries should be replaced at the same time. Mixing fresh
and exhausted batteries could increase internal cell pressure and
rupture the exhausted batteries.
FAULT FINDING
1.
No dial tone.
Make sure all connection of coil cord and line cord are
connected securely to the jacks.
Check the telephone operation in master telephone socket.
There may be a fault with the line in which case contact your
network operator.
2.
No display on the LCD.
Make sure the battery has put in the correct positions (+ and -)
or replace another new alkaline batteries, and adjust the contrast
level.
3.
Do not ring.
Check the ringer volume setting.
4.
If the Hands Free speaker does not work.
Verify that the line cord has connection is correct and tightly
secured.
Adjust the speaker volume level, and check the batteries are not
exhausted.
5.
Caller number do not display.
Did you wait for the second ring before picking up the phone or
pressing the hands free button ? The caller ID will only detect
information between the first and second ring.
6.
Contact your telephone company if the problem continues for
more than 24 hours. The telephone company may be
experiencing temporary line.
