1097 UHF Reader User Guide V1.2
© Technology Solutions (UK) Ltd 2013
9
USING THE 1128 UHF READER
BUTTON OPERATION
The 1097 UHF Reader has two distinct operations which can be initiated from a button click: to scan for UHF
transponders OR to scan for a barcode. Which operation is performed depends on the way in which the button is
pressed; a Primary or Secondary button action.
PRIMARY BUTTON CLICK AND HOLD
- UHF Transponder Read
The primary button click is a standard button action:
●
To initiate a primary button click press and hold the trigger button.
●
To terminate a primary button click release the trigger button.
In the default configuration the 1097 UHF Reader scans for UHF transponders as the primary function. The 1097
UHF Reader will continue to scan for UHF transponders while the button is pressed. It will stop scanning once the
button is released (and the current operation completes).
SECONDARY BUTTON DOUBLE CLICK AND HOLD
– Barcode Scan
The secondary button click is a single click quickly followed by a second press (press-release-press).
●
To initiate a secondary button click press then release then press and hold the trigger button.
●
To terminate a secondary button click release the trigger button.
In the default configuration the 1097 UHF Reader scans for barcodes as the secondary function. The 1097 UHF
Reader will continue to scan for a barcode while the button is pressed. It will stop scanning when any of the
following conditions are met:
●
A barcode is scanned.
●
The button is released.
●
The barcode engine times out.
>
>
>
>
>
www.tsl.uk.com
