background image

 

3

 

Limited Warranty 

 
Technologic Systems warrants this product to be free of defects in material and 
workmanship for a period of one year from date of purchase. During this warranty period 
Technologic Systems will repair or replace the defective unit in accordance with the 
following instructions: 

   

Contact Technologic Systems and obtain a Return Material Authorization (RMA) 
number and a copy of the RMA form. 

   

Fill out the RMA form completely and include it and dated proof of purchase with 
the defective unit being returned. Clearly print the RMA number on the outside of 
the package. 

This limited warranty does not cover damages resulting from lightning or other power 
surges, misuse, abuse, abnormal conditions of operation, or attempts to alter or modify 
the function of the product. 

This warranty is limited to the repair or replacement of the defective unit. In no 
event shall Technologic Systems be liable or responsible for any loss or damages, 
including but not limited to any lost profits, incidental or consequential damages, 
loss of business, or anticipatory profits arising from the use or inability to use this 
product. 

Repairs made after the expiration of the warranty period are subject to a flat rate repair 
charge and the cost of return shipping. Please contact Technologic Systems to arrange 
for any repair service. 

Содержание TS-SER4












Отзывы: