15
In Battery Mode
Touch once “
SNOOZE/LIGHT
” button to active backlight and projection for 8 seconds (the
projection switch in “ON” position)
In DC-adapter Mode
When using the DC-adapter
supply, touch the “
WAVE
” button can choose high brightness /
low brightness / no backlight brightness. The projection will always work unless the projection
switch is placed in the “OFF” position.
Please note:
When the projection is triggered, the projection distance is about 2 meters.
Environmental reception effects
The clock obtains the accurate time with wireless technology. Same as all wireless devices,
the reception is maybe affected by the following circumstances:
long transmitting distance
nearby mountains and valleys
near freeway, railway, airports, high voltage cable etc.
near construction site
among tall buildings
inside concrete buildings
near electrical appliances (computers, TV’s, etc) and metallic structures
inside moving vehicles
Place the clock at a location with optimal signal, i.e. close to a window and away from metal
surfaces or electrical appliances.
Reception of the Radio signal
The clock automatically starts the DCF signal search of any restart or changing of new
fresh batteries. The radio mast icon starts to flash.
At 1:00 /2:00 / 3:00 am, the clock automatically carries out the synchronization procedure
with the DCF signal to correct any deviations to the exact time. If this synchronization
attempt is unsuccessful (the radio mast icon disappears from the display), the system will
automatically attempt another synchronization at the next full hour. This procedure is
