14
A4: Date and alarm
A5: Day
A6: Indoor Temperature
Part B
– Back button and power
B1:
Projection window
B2: Projection Switch(ON/OFF)
B3: “SET” button
B4: “ALARM” button
B5: “+” button
B6: “-” button
B7: “WAVE” button
B8: Alarm Switch(ON/OFF)
B9: Projection rotate button
B10: DC-Adapter input jack and battery compartment
Part C
– TOP Touch button
C1
:
Snooze/light Touch button
Operating conditions
Set the alarm clock in a dry interior and protected from direct sunlight.
Ensure that the mains
plug is freely accessible in order to quickly disconnect the device from the mains in case of a
fault.
Initial operation
1. Connect the included power supply with the socket on the backside
2. Alternatively you can use batteries. Open the clocks battery compartment cover.
3. Insert 2 x AAA batteries observing
polarity [ “
+
” and “
–
“ marks] and close the clocks
battery compartment cover.
4. When you insert the batteries, all icons on the LCD display will light up for 3 seconds, you
will hear a beep tone and the clock detects indoor temperature.
5. Then the clock will enter the radio controlled time signal reception mode.
Inserting batteries
In order to keep your settings on the device when you take the device off the mains, the radio
alarm can also be operated with batteries.
1. Open the clocks battery compartment cover and remove the old batteries.
2.
Insert 2 x AAA batteries observing polarity [ “+” and “ –“ marks] and close the clocks
battery compartment cover.
Backlight and Projection function
A permanent projection and a permanent background lighting in the display are only possible
during operation with the power supply.
