EN4
1.
Lift up the battery compartment cover.
2.
Insert batteries observing the correct polarity (see marking).
3.
Replace compartment cover.
How to install and replace batteries in the temperature sensor
The temperature sensor uses 2 x AA, IEC LR6, 1.5V batteries. When
batteries will need to be replaced, the low battery icon will appear on
the LCD of the Temperature Station. To install and replace the
batteries, please follow the steps below:
1. Remove the battery compartment cover.
2. Insert the batteries, observing the correct polarity (see marking).
3. Replace the battery holder to the unit.
Note:
In the event of changing batteries in any of the units,
all
units need to
be reset by following the setup procedures. This is because a random
security code is assigned by the sensor at start-up and this code must
be received and stored by the Temperature Station in the first few
minutes of power supplying.
Battery change:
It is recommended to replace the batteries in all units every 12 months
to ensure optimum accuracy of these units.
