EN12
maintain accur
ate timing. If reception fail, scanning stops (“
” on
LCD disappear)
The clock can be set to scan the time signal manually by holding
“▼”
and
“▲“button for 3 seconds. Each reception takes about 5 minutes.
If receptions fail, scanning stops.
Stop scanning by holding
“▼” and “▲“button for 3 seconds.
“
DST
” shown on the LCD if it is in daylight saving time mode.
Manual time setting:
Hold the
“MODE” button (B2) for 3 seconds to enter time setting mode.
Press the
“▲” or the “▼” button to adjust the setting and press the
“MODE” button to confirm each setting. Keep the “▲” or the “▼” button
pressed, to accelerate the process and reach the desired value more
quickly.
The setting sequence is shown as follow: 12/24 hour time display ->
time zone -> hour -> minute -> second -> year -> month -> Day ->
weekday language.
Time zone setting can be used to set difference from DCF77 time, for
example 0 for Germany or -1 for UK.
