Technoline WS 9218, Инструкция по эксплуатации

Страница: 18 / 101

EN5
flashes
，
indicating active DCF
signal reception
stays on and
flashes,
indicating successful
signal reception
disappears,
Indicating failed signal
reception

The clock automatically scans the time signal at 1:00, 2:00, 3:00, 4:00,
5:00 every day to maintain accurate timing. If reception fails on all
times
, scanning stops (“ ” on LCD disappear) on this day and
starts a next attempt on 1:00 of the next day.

The clock can be set to scan the time signal manually by holding the
“▼” button for 3 seconds. Each reception takes about 7 minutes. If
receptions fail, scanning stops.

Manually stop scanning by holding the
“▼” button for 3 seconds.

“
DST
” shown on the LCD if it is in daylight saving time mode.
Manual time setting

In time display mode, press the
“▲” button to switch between 12 hour
or 24 hour display mode. In 12 hour display mode, the PM icon will be
displayed in the afternoon hours.

In time display mode, h
old the “ZEIT” button for 3 seconds to enter
time setting mode.

Press the “▲” or the “▼” button to adjust the setting and press the
“ZEIT” button to confirm each setting. Keep the “▲” or the “▼” button
pressed, to accelerate the process and reach the desired value more
quickly.

The setting sequence is shown as follows: year -> month -> day ->
weekday language -> hour -> minute -> time zone setting -> exit

Time zone setting can be used to set difference from DCF-77 time, for
example 0 for Germany or -1 for UK.

7 languages can be selected for the weekday in the following order:
German (GE) -> English (EN) -> Italian (IT) -> French (FR) -> Dutch
(NE) -> Spanish (ES) -> Danish (DA) -> back to the beginning with
German (GE)

The languages and their selected abbreviations for each day of the
week are shown in the following table: