Technoline WS 9060, Руководство пользователя

Страница: 15 / 32

EN4
Appearance description: Outdoor sensor
T1: Transmission
indication lamp
T2: Wall
mounting hole
T3: Channel
switch
T4: Battery
compartment cover
T5: Reset button
Initial Operation
：

Open the weather station battery compartment cover.

Insert 2 x AA batteries observing polarity [ “+” and “ –“ marks]. These batteries are intended as
back-up for adapter.

Insert the power adaptor and connect to the power socket

After power on, all icons on the LCD will briefly light up for 3 seconds, and you will hear a beep
tone, and indoor temperature, air pressure and humidity will appear.

The weather station will now start to search for the wireless remote sensor. This operation takes
about 3 minutes and RF antenna symbol
“ ” will flash.

Open the outdoor remote sensor battery compartment and insert 2 x AA batteries (observing
polarity “+” and “–“marks ).

After receiver has received the remote sensor, it will then enter into the radio controlled time
reception mode and the outdoor temperature and humidity data will be shown on the outdoor
section of weather station.
Note:

After the main device powered on, RF will be switched on for 3 minutes. If the wireless remote
sensor’s signal is not received by the main device within 3 minutes, it will automatically enter
the radio signal receiving.
Reception of the radio signal

DCF: radio signals transmission tower is located in Frankfurt /Germany, radio frequency is 77.5
KHz, under ideal conditions, product can receive the radio signal to calibrate the time within a
radius of 1500KM.

When the product is receiving the radio signal, the radio mast icon " " will flash. The clock
automatically starts the DCF signal search for about 7 minutes of any restart or changing of new
fresh batteries.