ENVIRONMENTAL RECEPTION EFFECTS
Your radio controlled clock obtains the accurate time with wireless technology. Same as
All wireless devices, the receiving ability maybe affected by, but not limited to, the following
circumstances:
Long transmitting distance
Nearby mountains and valleys
Among tall buildings
Near railway, high voltage cable etc.
Near freeway, airport, etc
Near construction site
Inside concrete buildings
Near electrical appliances
Neat computers and TV’s
Inside moving vehicles
Near metallic structures
Place your clock at a location with optimal signal, i.e. close to a window and way from metal surfaces or
electrical appliances.
Step 1
Inset the stand to the bottom of your weather station.
Step 2
Slide open the battery cover at the back of your weather station, then insert 3 x AA alkaline
batteries into the battery compartment to the back of your weather station by observating the c/-
polarity signs inside the battery compartment. Replace the battery cover.
Step 3
Keep your Weather Station and wireless sensor next to each other. Slide open the battery
cover at the back of your wireless outdoor sensor, then insert 2 x AA alkaline batteries to the back of it.
Replace the battery cover. Your weather station will receive data signal from the outdoor sensor in few
seconds. Then place your outdoor sensor in a dry and shaded area outdoor.
Step 4
Peel off the protective label on the front. Your Weather Station is ready to work for you.
Step 5
After your weather station receives the outdoor temperature and humidity, it will start to search
for the DCF signal. This may take overnight. In case your weather station does not catch the DCF
signal during the day, set the clock manually.
Remarks:
1. Keep in mind that your outdoor sensor has a 100-feet open air transmission with no obstructions.
Actual transmission range will vary depending on what is in the path of the signal. Each obstruction
(roof, walls, floors, ceilings, thick trees, etc.) will effectively cut signal range in half.
2. During reception of the DCF time signal, all buttons do not function and your weather station does
not take temperature and humidity measurement. After first time installation, the temperature and
relative humidity readings will get stable and become more accurate in around 30 minutes.
3. The backlight of LCD is on when the user press the
Snooze / Light
button.
DCF SIGNAL RECEPTION AND SIGNAL INDICATOR
After your clock is powered up, it starts to receive DCF signal. The
icon flashes.
Содержание WS 7019
Страница 1: ...INSTRUCTION MANUAL OF WS 7019...
