displayed if value higher than +49°C, resolution is 1°C/
℉,
accuracy is +/-1.5°C at 0°C ~ +40°C.
`
Indoor temperature will be measured interval 30 seconds.
`
At normal mode, press “
DOWN
“ key to select °C or °F.
`
At normal mode, press “
MEMORY
“ key to display Max. or Min. indoor & outdoor temperature, Memory will cleared
if press & hold “
MEMORY
“ key more than 2 seconds.
RCC Receiving:
`
At 1:00 /2:00 / 3:00 am, unit will automatically receive Radio signal for Max. 7 minutes, corresponding LED flash; If
receive successfully, Clock will be synchronized and RCC LED be on, otherwise RCC LED be off ;
`
Press and hold the “
WAVE
“ key can enable or disable the RCC receiving manually.
F.Y.I.:
`
We recommend a minimum distance of 2.5 meters to all sources of interference, such as televisions or computer
monitors
`
Radio receiving is weaker in rooms with concrete walls (e.g.: in cellars) and in offices. In such extreme
circumstances, place the unit close to the window.
RF Receiving:
`
At RF searching mode,
“--.-”
icons flash, unit will receive the RF signal from Outdoor Temperature Transmitter,
When outdoor temperature value be displayed ,indicate that the transmitter have been registered, and main unit
will exit RF searching mode immediately.
`
Main unit only can register 1pc Transmitter.
`
Transmission distance is up to 30m.
`
If main unit display
“--.-”
( Not flash ), it means that the transmitter have been lost link. Please press and hold
“
UP
“ key to enter RF searching mode (
“--.-”
icons flash ) to search the transmitter!
`
When Outdoor Temperature Transmitter in Low Battery,
“LO”
(Indicate Transmitter in Low Battery status) &
“Temperature Value”
will be displayed alternatively.
F.Y.I.:
`
If Transmitter lost link frequently, please move the Transmitter close to main unit!
Weather Forecast:
`
Weather forecast include Sunny / Partly Cloudy / Cloudy / Rainy.
Remarks:
1, To save power, when powered by batteries only, the unit will turn off display. And display turn on for 10
seconds if press any keys except “
WAVE
“ key.
2, Display will be always on if powered by adapter.
3, During RCC receiving, to lower interference , all LEDs off except RCC LED flash .
